TITAN

Titan es una cinta de gotero plano que se fabrica con las tecnologías más avanzadas y de acuerdo a los mayores niveles de calidad.
Es ideal para cultivos hortícolas e industriales: tomate, fresa, pimiento, melón, patata, calabaza, lechuga, berenjena…

Ventajas:

• Precisión
• Facilidad de uso
• Fiabilidad

Características:

1. Diametro 16m
2. Espesores 0,15 mm – 0,8 mm: 6mil-36mil
3. Caudales 0,8 1,3 1,6 2,4 y 3,8 lph.
4. Espaciamientos: 15cm-50 cm
5. Presión de trabajo: 0,4-1 Bar

Catalog

TITAN Drip Tape

Titan is an irrigation drip tape manufactured with the most advanced technologies and meeting the highest quality standards.
TITAN is ideal for agricultural crops: tomatoes, strawberries, peppers, melons, potatoes, pumpkins, lettuces, eggplants…

Benefits:

• Precision
• Ease of use
• Reliability

Description

· TITAN PC dripper is a state of the art, flat pressure compensating emitter, welded by a high-precision laser system. It consists of three parts; the Body with the labyrinth, the silicone Membrane, and the Cover.· It is appropriate for a wide range of pipe wall thicknesses (12-48 mil) and emitter spacing.· TITAN PC fits hoses with an internal diameter above 13.5 mm.· They have excellent emission uniformity (CV) Class A· There are fewer friction losses, due to the ultra-slim design of the TITAN PC dripper   

There are 3 types of TITAN PC drippers for every flow:

1) Drain

2) Anti-Syphon

3) Non-Drain

 Drain PC drippers begin to supply with water as soon as water enters the pipe. The nominal flow rate of the dripper begins at 0.5 bar pressure inside the pipe. When the irrigation cycle is completed, the pipe empties fast (water drainage effect).

Anti-syphon PC drippers begin to supply with water as soon as the irrigation pipe pressure rises above 0 bar. The nominal flow rate of the dripper begins at 0.5 bar pressure inside the pipe. When the irrigation is completed the pipe empties. Anti-Syphon drippers shut in negative pipe pressure, and therefore do not allow dirt to enter inside the dripper. The difference between Drain PC dripper and Anti-Syphon is that an irrigation system with Drain PC drippers empties faster than one without-Syphon.

Non-Drain PC drippers begin to supply with water as soon as the irrigation pipe pressure rises above0.3-0.5 bar. When the irrigation is completed, the water stays inside the pipe at 0.2-0.3 bar pressure eliminating the drainage and refill effect.

* The flow rates in the table relate to the Drain PC drippers. The Anti-Syphon and Non-Drain PC drippers may provide higher flow rates, up to 0.2 Lph, depending on the raw material of the pipe and methods of production.

Design Advantages of flat PC dripper

1) The TITAN flat PC dripper can be inserted in pipes with a wide range of wall thicknesses(12-48 mil).

2) The TITAN PC dripper’s height is small, therefore the resistance to the water flow inside the pipe is minimal. This allows irrigation in longer lateral lengths.

3) Because the labyrinth of the TITAN dripper is external, there is more flexibility on defining the flow rate around the nominal value, depending on the production parameters and materials.4) TITAN PC is highly resistant to clogging. 

Characteristics:

1. Diameter 16m
2. Thickness 0,15 mm – 0,8 mm: 6mil-36mil
3. Flows 0,8 1,3 1,6 2,4 y 3,8 lph.
4. Spacing: 15cm-50 cm
5. Operating pressure: 0,4-1 Bar

Catalog